Posted by on October 19, 19101 at 23:43:53:
10/19/01
Rudolph Louis Zelenka III
7338 28th Ave. SW
Seattle, WA 98126
(206) 600-1929
rzelenka@hotmail.com
rudolphz@scn.org
Dear Engineer Manager:
Enclosed are my latest resume and this cover letter, for your consideration as a Detailer, Designer, or Engineer in Plastics/Metal. My background, training and exposure which includes, metal/plastic/polymer mechanical design, process engineer for plastic parts, cad/cam programmer engineer, research designing in polymer properties and project engineer.
During my work experience and education I have approximately 2500 hours in Pro/Engineer experience.
While attending school at Pittsburg State University I tutored students in Pro/Engineer. My design experience with Pro/Engineer has been in both academic setting and working experiences.
In June and July summer session I help to finish, networking two SGI UNIX Indigo IRIX 6.5 to assist in my senior research project of predicting the properties of two copolymers. They were fullereneC60 with polyurethane as a copolymer. This was accomplished using the software Cerious2 4.2 and Insight II provided by Molecular Simulation Inc., one of the leading material science software in the world. In July the work was on the physical experiment of Polyurethane and C60 based on Scheme I and Scheme II from article, Polyester and Polyurethane of Diphenyl C61: retention of Fulleroid Properties in a Polymer.
I look forward to meeting you, and am very much willing to go where my skills are needed. I am very eager to put into practice all of my new and old skills, for your company. I do desire to create a good working relationship as a winning team. I am willing to go anywhere in the States at this time. At any time, you may leave a message, send a postcard, or you can call or e-mail me. I do check my e-mail almost everyday. Thank you for allowing me to be part of your screening process.
Sincerely,
Rudolph Louis Zelenka III
RUDOLPH LOUIS ZELENKA III 7338 28th Ave. SW Seattle, WA 98126 Message Ph. (206) 600-1929
rzelenka@hotmail.com or rudolphz@scn.org
Objective: PLASTIC/POLYMER DESIGN or PROCESS ENGINEER, CAD/CAM PROGRAMMER ENGINEER
RESEARCH DESIGNER IN POLYMER PROPERTIES or PROJECT ENGINEER (in training)
Skills: * PRO/E V. 18-2000i NT &Unix * Database Management * AUTOCAD 11–14&2000 DOS & WIN
* Time Management Training * Excel 4.0 – 97 * SOLIDWORKS 96 & 99
* MICROSTATION 5.0 * Ten Key (181 spm) * CADKEY 6.0-7.1
* Visual Basic Ver. 3 & 4 * Bidding Process * As-Built & Civil Drafting
* Plastics design criteria * Manual Drafting * AUTOLISP Programming
* Verification of Documents * HP-UNIX 9.07 SAM * Boundary Element Analysis
* Moldflow® * Polymer Design Tools® * SciPolymer®
* C-Mold Project Engineer® * Bob-CAD/CAM® * Material (Polymer)Selection Databases
* SurfCAM99® * GEO-TOL 82 & 92 Standard * IR Spectroscopic
* MasterCAM 7® * CHEOPS® * Dynamic Mechanical Spectroscopy
* Thermomechanical Analysis * H-1 & C13NMR * Cone and plate viscometer
* Thermogravimetric * GPC * Mass Spectroscopy
* Dielectric Spectroscopy * AutoLISP * Viscometry
* Pictorial & Technical Designing & Isometric projection with 3D graphic rendering
* Knowing how and where to access any type & aspect of Polymer/Plastic information off the Internet
Education:
09/98-07/00 Pittsburg State University Plastic Engineer Technology BSPET Pittsburg, Kansas
Extra studies in Polymer Research at Kansas Polymer Research Center
03/97-06/97 Olympic College Bremerton, Washington 01/94-11/96 North Seattle Community College CAD for Industrial Applications Seattle, Washington
11/92-05/93 Seattle Vocational Institute Business computer Applications/office administration Seattle, Washington
Employment:
The following are a listing of contract and part time work done during and between College and University school. Pro/E 2500 hours
03/01-06/01 Various kinds of work Seattle, Washington
Home building trades, to use in the future if I want to remodel a home.
09/00-02/01 Action Air Pittsburg, Kansas
Lived and work in a Vacuum Store and learned how plastic parts were being used and the problem of their functions with the type of material used. Became one of the leading seller of High End Home Cleaning Systems.
05/00-07/00 Pittsburg State University Pittsburg, Kansas
During research projects did work in kitchen at the University.
2 Week Projects Kansas Polymer Research Center (on campus at PSU) Pittsburg, Kansas
Did a few projects (paid work) regarding their Polyurethane through Polyoil. This is where we are learning do use the instruments in Polymer Science Research in Evaluation, characterization, & Analysis of Polymers for our Polymer Thermodynamics class.
11/99-04/00 SEKTAM of Independence Inc. Independence, Kansas
Work full time during the holiday, school time, worked 10 hours every Tuesday till a April. Doing design and CNC generation in Pro/E 2000i, learning & using Pro/Moldesign and Pro/NC and Pro/NCProcessor. This company does work in designing of blow molds and NC shop. They are the major supplier mold builder of Bliz Corp. Parts include 2 & 5 gal. gas containers, new cat litter design and some injection molded parts, Tool paths and CNC generation. Starting to learn to use SurfCAM99.
04/99-5/99 Sunbeam Corp. Neosho, Missouri
I did contract work for doing drafting & design for Quality Control using Pro/Engineer 18 Unix. Units of outdoor fire-grill units were the parts manufacture there. About 6 weeks of contract work & the work was completed.
10/98-01/99 Able Body Design Inc. Pittsburg, Kansas
Learn a new software, (MasterCAM 7) & did designing of tools (molds) for thermoforming of parts and CNC machining for prototypes for the inter cabs of major truck lines, 16 wheelers. Did up to 70 hours a week during the holidays. Learn how to use the surfaces to design different types of Thermoforming methods. Did touch on twin sheet designing & the work that was assigned.
08/97-04/98 Thomas & Betts, Inc. Osawatomie, Kansas
Was employed at Thomas & Betts, Inc. as a Pro/Engineer version 18 Designer /Drafter with design revision in sheetmetal, using HP-UNIX 9.07 operating system. We build large custom commercial heating & cooling ventilation system for large buildings, warehouses, schools, hospitals, etc. I have now workable design experience in Family Tables (Instances), Pro/Assembly Management, Total management of Pro/PDM 3.3, Pro/Sheetmetal, Pro/Batch, Pro/Detail and Pro/Photorender. Made improvements in how they do their drafting, making(editing) & using lots of mapkeys and the layouts of the drafting design. Also we are now using Pro/Batch, to do the plotting and dxf, after hours. Helping them know their HP-750c plotter and how to use it better. Learning to properly design sheetmetal for fabrication and documentation. Installing Pro/PDM for a new license, formatting UNIX files to DOS files. Using AutoCAD in UNIX system. Using Pro/E for square footage and mass properties in Pro/Report. I have sent in about, eight enhancement ideas for Pro/Detail, for version 20. I now have 1700 hours in Pro/E.
02/97-03/97 Trnka Engineering, Inc. CAD OPERATOR Bellevue, Washington
Prepared CAD drawings for electrical, mechanical and participated in re-engineering of Boeing Company facilities, with their standards. Did plotting configurations in computer and prepared documents for a revision project.
02/97-02/97 Heath Custom Press, Inc. CAD OPERATOR Renton, Washington
Built 3D models of parts, including sheetmetal, for a special custom press. Modified existing 3D model drawings for correct dimensions. Prepared documents for a project and revision drafting. Assignment completed for contract work.
10/96-10/96 Seattle Boiler Works, Inc. CAD OPERATOR Seattle, Washington
Assembled and prepared drafting work on different types of large boiler tanks. Modified existing tank drawings, creating more section views. Made weld details and made into a drawing template in AutoCAD. Configured AutoCAD 13 to work with Windows 95 and installed internal modem, to work over the Internet. Assignment completed for contract work.
08/96-09/96 SpaceLabs Medical, Inc. CAD OPERATOR Redmond, Washington
Did revision work on Engineering projects and order process, kept within GMP. Used Cadkey 7 cad system software. Made macros to help speed up the work. Learned UNIX Database-system (LAN Manager). Corrected lots of mistakes of previous drawing for manufacturing assembly. Assignment completed for contract work.
10/94-06/96 North Seattle Community College. CAD LAB Manager Assistant Seattle, Washington
Instructed students on the proper use of AutoCAD DOS & WIN vers. 12 & 13., CADkey, Accurender & Hewlett-Packard plotters. Configured AutoCAD, Designer & Autovision from the box. Helped several students to set up their Autodesk software at home. To work in WIN 95. Judged Seattle Mechanical Drafting AutoCAD contest. Privately Tutored in AutoCAD students and engineers.
10/94-12/95 North Seattle Community College. Seattle – (Facilities) CAD OPERATOR Seattle, Washington
Completed “bid documents” for several projects. AutoCAD to WORD for WIN, by faxing, to bidder. Configured AutoCAD to an updated version. Checked and corrected existing dimensions for the whole campus and grounds. Created multi-views and special scales for teachers & staff with 8.5 by sheets. Created and verified outdoor-lighting system. Consulted with the engineering staff on development of plans & design of buildings & prepared layout diagrams to ensure accurate interpretation of designs and help with space planning. Prepared a civil layout for the outdoor lighting system. Discussed necessary changes with staff members and did the corrections.
04/95-06/96 Shoreline Community College CAD LAB Monitor & Tutor Seattle, Washington
Instructed students how to properly use AutoCAD 12 WIN. and plotters. Explained how to use fewer commands to accomplish the same task, at hand. Learned to work with all kinds of student’s problems.
03/93-04/93 Seattle Vocational Institute Office Assistant Seattle, Washington
Database management of student’s records for Alpha/Num filing and answered phones. Postal meter work.
11/92-03/93 American Loss Prevention Services, Inc. Security Officer Seattle, Washington
Security inspection for major downtown building & parking lots, guarded government installations, material and documents against illegal acts; such as sabotage, riot and espionage. Maintained daily logs.
04/90-08/91 Washington Inventory Service, Inc. Inventory Specialist Seattle, Washington
Counted material, equipment, merchandise, or supplies in stock and posted totals to inventory records, using special RH & LH touch 10-key calculator with computer capacities. Verified & adjusted clerical computations against physical count of stock.
04/89-01/90 Baxter-Ruterford, Inc. Bandsaw Blade Welder Seattle, Washington
Welded bandsaw blades on MF-3 type. Learned about construction supplies in warehouse and classified material for inventory.
Learned what parts did what in the building industry.
09/78-03/89 Associated-Industries, Inc. Bandsaw Blade Welder Seattle, Washington
Welded bandsaw blades on MF-3 type and Thomson type welders. Maintained all the machines in good working order. Proper alignment and kept machines clean and repaired them. Modified parts so that the machines worked more efficient. Worked the Boeing contract most of those years, to sharpened and supplied their blades. Helped in the office at times.
Professional References and further work experience available upon request