Posted by on December 08, 19102 at 15:01:40:

Curriculum Vitae

Name MOHSEN FATHIZADEH
Date of Birth 07 November 1961
QUALIFICATIONS B.Sc. in Chemical Engineering, Gas Industries (1988)
Sharif University of Technology, Tehran, Iran
Master of science, Industrial Engineering (1997)
Amir Kabir University of Technology (Tehran Polytechnics University), Tehran, Iran
PROFILE
Over 12 years Oil and Gas experience, I have been involved at all levels of conceptual, Front End Engineering, Detailed Design and operational support.

SUMMARY

June 2002 To Date BP/IOC (UK)
Senior Process/Project Engineer
April 2002 June 2002 Worley Qatar
Senior Process Engineer
June 2001 April 2002 BP/IOC (UK)
Senior Process/Project Engineer
March 2000 June 2001 OIEC (Oil Industry’s and Engineering Company)/ LG
(On a Part Time Basis)
Project/Process Engineer
September 2000 December 2000 PetroPars (UK)
Process Engineer
December 1997 September 2000 IOOC (Iranian Offshore Oil Company)
Project Leader
February 1995 December 1997 NIOC/IOOC
Senior Process Engineer
October 1993 February 1995 NIOC/IOOC
Process Engineer
January 1990 October 1993 NIOC/IOOC
Trainee Graduate
December 1988 January 1990 Kerman Tyre Co. Ltd
Construction Engineer

DETAILED WORK EXPERIENCE:

BP/IOC
June 2002 – To Date

IOC – BP Amoco, Rhum Project
Senior Process/project Engineer working on Rhum gas/condensate field. Working on FEED verification in IOC office in Tehran. The responsibilities are included the verification of Flow Assurance Report and Performing the economical studies using PIPESYM and in-house Economic Evaluation Model.
The project is to produce 300 MMscfd of gas from Rhum Gas/Condensate field. This field is located in Northern North Sea, Block 3/29a, about $420 million project.

Khuff Wellhead Treatment plants project - Worley Limited Qatar - Qatar
April 2002 -- June 2002

Senior Process Engineer working on khuff Wellhead Treatment plant facilities project. Working on FEED verification and detail design in Worley Engineering office in Qatar. Responsibilities had included the simulation of Natco and BS&B typical plants, carrying out a complete heat and mass balance using HYSYS. Sizied the required indirect water bath type inline heaters for seven Natco and Bs&B plants. Hydrualic studies for the new inlet and outlet lines of inline heaters. Generating cause and effect charts for the inline heaters. Calculating the required methanol injection for hydrate formation prevention during the cold start up. Reviewed PFD & P&IDS. Preparing line list and Data Sheets for Heaters.

BP/IOC Aberdeen
June 2001 – April 2002

IOC – BP Amoco, Rhum Project– Aberdeen
Senior Process/project Engineer working on Rhum gas/condensate field. Working on various development scenarios in BP office. During the Pre-Feed/Concept selection phase responsibilities had included the simulation of the complete system, carrying out a complete heat and mass balance using “HYSYS”. Infield and main gas lines sizing using “PIPESYM”, Developed PFDS utilized “HYSYS” to estimate hydrocarbon inventory, investigated hydrate formation points, feasibility studies on using TEG, MEG, Methanol hydrate inhibitor injections and injection requirements. Sized chemical pumps, and injection lines. Performing the economical studies and cost compares using “QUESTOR” and in-house Economic Evaluation Model.
The project is to produce 300 MMscfd of gas from Rhum Gas/Condensate field. This field is located in Northern North Sea, Block 3/29a, about $350 million project.
LG/OIEC, South Pars/ Tabnak / Bidboland Gas Projects (On a part time basis)
March 2000 - June 2001
Project/process Engineer involved in the preparation of inputs and documents for the various proposals and tender inputs for the company. Working on the part time basis on various projects such as TABNAK, BIDBOLAND, and SOUTH PARS phases 9,10,11,12 gas projects. In these projects co-operation had been focused on provision of technical/commercial proposals for National Iranian Gas Company (NIGC).
These projects are planned to produce about 1 Bscfd of gas each.
PETROPARS (UK, Ltd)/SAMSUNG, South Pars Phase I Project - Malaysia
September 2000 - December 2000
Process Engineer working on South Pars phase I offshore Gas field, Working on Detailed Design offshore at Technip office in Kuala Lumpur, Malaysia. Responsibilities included the review of vendor documents/ drawing for package items, co-ordination with other related engineering groups (piping / Mechanical / Instrumentation), Capacity and sizing Check on the dehydration package and separation system using Shell Design and Engineering Standards, reviewed PFD & P&IDS, dehydration vessels and all in-line instrument data sheets. Checked the requirement and sizing of relief valves.
The Project is to produce 1 Bscfd of gas from South Pars Phase I, Separation, offshore Dehydration, and directing the treated gas onshore for further processing.
December 1997 - September 2000
NIOC/IOOC
Project Leader

NIOC/Total Fina Elf, Dorood Project - France
July 1999 - September 2000
Working on FEED and Involved in preparation of inputs, review design, process and facilities optimisation in Dorood offshore/onshore Buy-Back project. Other Responsibilities in this project included reviewing PFD and P&IDS during FEED phase, Capacity check on the compression system using Ea (Engineering Aid, Process Simulator), review of vendor documents/ drawing for package items and make recommendation on the fuel gas system in ELF office, Paris, FRANCE.
The project is throughput enhancement from 170000 bbl/d to 220000 bbl/d of oil by using gas/water injection into reservoir. $850 million project
NIOC/Total Fina Elf, Balal Buy-Back Project
Working on FEED. Reviewed PFD & P&ID & UFDS using API 14C and make recommendation on separation system, waste water system and also reviewed the FEED documents in BALAL Buy-Back project.

The project is to produce 40000 BPD of oil from Balal field, offshore separation, and directing the crude oil onshore for further processing. The value of this project is about $300 million.

NIOC/IOOC, Esfandiar, Foroozan and Soroosh Buy-Back projects
Involved with various pre-projects activities. Checking process design documents, Master Development Plan (MDP) and pre-qualification of contractors.
Performing the economical studies, conceptual study and make recommendation on Master Development Plan (MDP) in Esfandiar Buy-Back project.
Performing preliminary process and economical studies in Foroozan Buy-Back project.
NIOC/IOOC, Relocation of Main Flares in Kharq Island
Involved in preparation of scope of work for relocation of two main flares (Petro Chemical Co. -N.I.O.C. -OFFSHORE project) using API 521.
The project included the relocation of two IOOC’s existing flares in Kharq Island, IRAN.

NIOC/IOOC, Aboozar Production Increase Project
Involved in verification and studies on turbo pumps and oil production system, adequacy analysis of equipment and piping systems for revamp jobs. Tie –up process integrity check for utilities and off sites with process plant. Prepare preliminary installation procedures and schedules, and hydraulic analysis of existing pipeline. Other Responsibilities in this project included developing PFD and P&IDS.
Project included the installation of a turbo pump to enhance throughput on Aboozar platform, Kharq Island, Iran.
BP/NIOC, Rhum Project
Co-operation and assistance in economical evaluation in Rhum (BP-IRAN) project.
The project is to produce of gas/condensate from Rhum field. This field is located in Northern North Sea, Block 3/29a.
NIOC/IOOC, Chemical injection and surfactant treatment
Involved in Performing chemical injection and surfactant treatments studies for improvement of Foroozan oil emulsion and study about various methods for prevention of emulsion in Foroozan platform.

February 1995 - December 1997
NIOC/IOOC
Senior Process Engineer
NIOC/IOOC, Stabilizer Performance Optimisation
Senior process Engineer involved in process simulation (ProII ver. 3.1) to optimise the performance of the stabiliser column using a combination of hot and cold stripping system, this study focused on efficiency improvement of the stabiliser and carrying out a complete heat and mass balance using PROII.

NIOC/IOOC, Dehydration Technical Specification
Senior process Engineer involved in preparation of sweetening and dehydration technical specification for power plant in Kharq Island, Iran.

NIOC/IOOC, Resalat / Nowrooz Scope of Work
Senior process Engineer involved in preparation of scope of work on Resalat Offshore project. Also prepared the scope of work for renovation on Nowrooz offshore platform.
Carrying out a complete Heat and Mass balance using “PROII” for Nowrooz project.
NIOC/IOOC, Nowrooz Feasibility Study
Senior process Engineer working on the feasibility design, responsibilities included preliminary study on renovation and reconstruction processes on Nowrooz field, IRAN.

Total/NIOC, Sirri Basic Engineering
Senior process Engineer involved in PFD & P&IDS reviewing and co-operation in Sirri-Total project (Iran - France project in Sirri field).

NIOC/IOOC, Desalter Specification
Senior process Engineer involved in provision of desalter specification (Electrostatic Dehydrator and Desalter) for oil treatment system in Kharq Island.

NIOC/IOOC, Acidizing and Chemical Injection
Senior process Engineer responsible for stimulation program and toluene, acid and chemical injections into the two oil wells in Foroozan oil field.

NIOC/IOOC, Salman Gas Lift Optimisation
Senior process Engineer involved in provision of software program on Salman gas supply (Gas lift optimisation).

NIOC/IOOC, Dorood Infield Pipelines
Senior process Engineer involved in process design of onshore oil pipelines including simulation/optimisation of flow schemes, generation of heat and material balance between wellheads and relevant plant in Dorood field using PipePhase Simulator.

October 1993 - February 1995
NIOC/IOOC
Process Engineer
NIOC/IOOC, Preliminary Studies on Dorood Plant
Process Engineer involved in execution of design studies on pipelines (two phase study) for Dorood (onshore plant in Kharq Island) plants.

NIOC/IOOC, Salman Gas Lift Optimisation
Process Engineer responsible for sizing of high pressure gas pipe lines and ordering of chokes and orifices for installation on three well head platforms in Salman offshore field.

NIOC/IOOC, Foroozan Pump
Process Engineer responsible for improvement studies for FX platform (one of the production platforms in southern part of Iran) sea facilities and installations.
The project scope of work comprised of pipeline pumps design and assistance during pre-commissioning, commissioning and conducting for the process plants including troubleshooting.
NIOC/IOOC, Sirri Sulfide Reduced Bacteria(SRD) Studies
Process Engineer responsible for a study in to the water injection system and supervision of a project team for study around the presence of sulfide reduce bacteria in injection water in Sirri island oil field, and other responsibilities included troubleshooting and process design modifications.

January 1990 - October 1993
NIOC/IOOC
Trainee Engineer

NIOC/IOOC, Software Programs
Involved in preparation of software computer program on production statistics of N.I.O.C.-OFFSHORE including statistics on water injection and status report of oil wells. Also involved in supervision of project for preparation of software computer programs on production statistics of N.I.O.C. (National Iranian Oil Company).

NIOC/IOOC, Technical Training Courses
Based on the Iranian Offshore Oil Company’s training program, the two early years of working are allocated for training courses. During this time, I have passed the two years familiarisation period in Lavan, Sirri, Kharq islands, Bahregan Oil Centre and Tehran office. During this time, I have passed the familiarisation period in following operational districts
1991-1992 Production Department Kharq Island, Iran Foroozan, Aboozar, Dorood-1 and Dorood-2 Plants (Onshore)
Foroozan and Aboozar Production platforms (Offshore)
Production Department Sirri Island, Iran Nasr and Nosrat Platforms (Offshore)
1990-1991 Production Department Lavan Island, Iran Salman Complex, Resalat and Reshadat Production Platforms (Offshore) Salman Plant (Onshore)
Production Department Bahregan Oil Centre Hendijan and Nowrooz Plants (Offshore) Hendijan and Nowrooz Plants (Onshore)

When I was in the employ of NIOC-OFFSHORE, I had written a few applied programs for the above-mentioned company. Some of these applied programs are being used in various departments of N.I.O.C.-OFFSHORE. A listing of some these applied programs follows
N.I.O.C-OFFSHORE statistical calculation with Dbase III plus.
Gas Lift Calculation and Optimisation with Quick Basic.
Orifice Sizing with Quick Basic.
Cash Flow and Economic Calculation with Excel and Foxpro.
Status Report of Wells with Foxpro and Quatropro.
Pressure Surveys (Data Gathering for Static, Built up and Falloff Surveys) with Foxpro.
Amerada Calibration Program and Well Test Programs with Foxpro.

Iran Kerman Tire
December 2000 - January 2000
Construction Engineer
Involved in provision of tire specification and technical information in Kerman Tyre & Rubber Company.
Computer Knowledge
Hysys Ver. 2.1
Pipesim Ver. 2000
QUESTOR Ver. 7.1
PROII Simulation Science Inc. Ver. 3.1 (Energy - Material Balancer and process Simulator)
PipePhase Ver. 3.1 (Pipe Line Simulator)
Ea (Engineering Aid, Process Simulator)
Expert Choice
Windows 95 & 98, Excel Ver. 7, Power Point Ver. 7, WINWORD Ver.7, WORDPAD, Visio
AUTOCAD Ver. 12
QUATROPRO, Lotus 123
HARWARD Graphic Ver.5
Norton, Pc Tools, PCSHELL Utilities
Pe2, WP, PW, FOXPRO Ver. 2.1
Dbase III plus, Dbase IV
Basic, Quick Basic and Fortran Languages, Dos 6.2

Standards/Design Practice
Familiar with following standards:
Some of the Shell Design and Engineering Standards such as Glycol–Type Gas Dehydration and Hydrate Inhibition System (DEP 20.04.10.10.GEN.).
API 12J, API 520, API 14c, etc.