Posted by on June 20, 19102 at 19:42:30:

RESUME NAME : RISALAT ALI POSTAL ADDRESS : H No. 259, 4th Floor, Park Road, Gaffar Manzil Ext. Jamia Nagar, Okhla, New Delhi -110025 Phone No. (011) 6310455
PERMANENT ADDRESS : H No. 404, Gali No. 13, Karim Nagar, Hapur Road,
Meerut City -250002, UP Phone No. (0121) 701121

e-mail ADDRESS : r.ali@fluor.com

FATHER’S NAME : RASHID ALI

DATE OF BIRTH : 06th July, 1958

QUALIFICATION :
1. High School with Science Group in 1974 from UP Board, II Division
2. Intermediate with Arts Group in 1977 from UP Board, II Division
3. Draftsmanship (Mechanical) in 1980 from AMU Aligarh, I Division.

EXPERIENCE :
1. Worked in Drawing Section of m/s National Sugar Industries, Delhi Road, Meerut, UP from 21st April 1981 to 10th December 1981 as Trainee Draughtsman (Mech.).
: My duties were to prepare the drawings of mini sugar plants and their parts also foundation drawings from engineer’s sketches.

2. Worked in Design Office of m/s J. K. Synthetics Ltd. (FEM Division), Dadri, Ghaziabad, UP from 13th December 1981 to 28th January 1985 as Draughtsman (Mech.).
: My duties were to prepare the detailed engineering drawings for fabrication of Pressure Vessels, Heat Exchangers, Column, Reactors & Storage Tanks etc. based on various relevant codes e.g. ASME, TEMA, DIN, IS and API with Bill of Materials used in Chemical, Petrochemical, Gas, Oil Refining & Synthetic Fibre Industries, under guidance of Design Engineers.
I also prepared Cutting Layouts of various parts of above equipments as per their development of surfaces.
3. Worked in Engineering Dept. of m/s Chemical & Metallurgical Design Company Ltd., 511, Mansarovar, 90, Nehru Place, New Delhi from 30th January 1985 to 24th November 1986 as Draughtsman (Mech.).
: My duties were to prepare the Data Sheets of various equioments, Plant Layouts, Equipment Arrangement Drawings, Pert Charts, Flow Sheets & Piping & Instruments Diagram etc.,
I also have elementary knowledge of Piping Drawings.
4. Worked in Design Office of m/s Cimmco Ltd., (Heavy Engg. Div) D-180, Okhla Indl. Area, Phase-1, New Delhi from 26th November 1986 to 09th November 1992 as an Assistant Superintendent (Mech.). Company is Registered Vendor of EIL, ONGC, IOCL, GAIL, PDIL & RDSO etc.
: My duties were to prepare the detailed engineering drawings for fabrication of Pressure Vessels, Heat Exchangers, Columns & Storage Tanks etc., from Client’s Data Sheet, based on various relevant codes e.g. ASME, TEMA, IS & API. I also prepared detailed engineering drawings for fabrication of Tank Barrels used in transportation of LPG, Petrol, Liquified Anhydrous Ammonia & Phosphoric Acid etc., under inspection of RDSO, EIL, LLOYDS & BUREAU VERITAS for Indian Railways.

5. Worked in Engineering Deptt. Of m/s Kinetics Technology India Ltd., (A Mannesmann Company), Sheetla House, 73-74, Nehru Place, New Delhi from 11th November 1992 to 03rd October 1994 as Designer (Mech.), Company is having ISO: 9001 Certification.
: My duties were to prepare the detailed engineering drawings for fabrication of Pressure Vessels, Heat Exchangers, Columns & Reactors etc., as per requirements given by Process Deptt. Also checking of above drawings (In-house & vendor) along with Bill of Materials, Cutting Layouts etc.

6. Worked in Technical Deptt. Of m/s Belleli Saudi Heavy Industries Ltd., Post Box No. 10138, Al-Jubail Industrial City–31961, KSA from 07th November 1994 to 09th August, 1999 as Supervisor (Drafting- Mech.), Company is having ISO: 9001 Certification & authority of using stamp PP, U, U2 & S of ASME, Stamp PI of API & Stamp R of National Board of Boiler and Pressure Vessel Inspector.
: My duties were to check the detailed engineering drawings for fabrication of Pressure Vessels, Heat Exchangers, Columns, Reactors & Storage Tanks etc., based on various relevant codes e.g. ASME, TEMA & API along with Client’s Specification.
: I have checked the drawings for various clients like Petromin Lubricating Oil Refining Co. (LUBEREF), The Bahrain National Oil Co. (BANOCO), Saudi Petrochemical Co. (SADAF), Qatar Fertilizer Co. (QAFCO) and Saudi Arabian Oil Co. (SAUDI ARAMCO) under inspection of CHIYODA Corporation, JAPAN, MW KELLOGG, UK, FLUOR DANIEL, USA & UHDE, GERMANY.
I also discussed various problems of drawings with respective clients & workshops.

7. Worked in Design Office of m/s Cimmco Birla Ltd., D-180, Okhla Indl. Area, Phase- 1, New Delhi from 25th October 1999 to 26th February 2001 as Deputy Superintendent (Mech.).
: My duties were to check the detailed engineering drawings for fabrication of Pressure Vessels, Heat Exchangers, Columns & Storage Tanks etc., from Client’s Data Sheet & Design Calculations based on various relevant codes e.g. ASME, TEMA, IS & API, under inspection of EIL, LLOYDS, PDIL & BUREAU VERITAS.
I also make Bills Of Material as per data sheets of various consultants for Estimation Dept with estimation software package of the company.

8. At present I am working in Mechanical Dept of m/s Fluor Daniel India Private Ltd., DLF Square, Jacaranda Marg, DLF City, Phase-II, Gurgaon since 1st March 2001 as Principal Designer (Mech.). Company is having ISO: 9001 Certification.
: My duties include preparing of Mechanical Engineering Drawings from Process Data Sheet & supervision of Cad Designer’s work. I also check the vendor’s detailed engineering drawings for fabrication of Pressure Vessels, Heat Exchangers, Reactors & Towers etc., as per Mechanical Engineering Drawings & Design Calculations based on various relevant codes e.g. ASME & TEMA. I worked with various software of FLUOR i.e. Fdvessel, Pcvessel & PDS frame work plus. I have worked in Sugarland, Houston, USA with FLUOR’s prime office for Low Sulfur Mogas Project of Exxon Mobil Refining & Supply Company.

COMPUTER KNOWLEDGE :
Working with AutoCAD Release-14 & various software developed by the company. Having limited working knowledge of PDS for Equipment modeling, Microsoft Words & Excels.

------------------- -------------------
(Risalat Ali) (Dated)