Posted by on February 07, 19102 at 02:21:35:

Experience Summary
· Over NINE years in the field of Oil and Gas, Petrochemical and Power industry, which can be broadly classified as:
· Design related experience such as Basic and Detailed engineering.
· Inspection, testing, commissioning and troubleshooting
· Project Engineering
Skill Summary
· Extensive experience in Preparation of Technical Specifications, Technical Bid Analysis of different Rotating Equipment and process equipment packages in accordance to different industry codes and standards.
· Inspection & testing of different Rotating Equipment in accordance to different industry codes and standards.
· Commissioning and trouble shooting of different Rotating Equipment’s and Process Equipments.
· Preparation of PFD, P&ID and Line sizing, Hydraulic calculation and equipment sizing.
· Project Engineering, man-hours estimate, project planning and scheduling, inter-discipline co-ordination, man-hours control, progress monitoring, quality control

Experience

Jul’98 till date: DAR AL-RIYADH Consultants
(Joint Venture of PARSONS INTERNATIONAL, USA)
Position Held: MECHANICAL DESIGN ENGINEER / PROJECT ENGINEER

Nature of Work (Basic and Detailed Engineering activities)

· Hydraulics Calculations, and Equipment Sizing
· Preparation of Technical Specifications, Technical Bid Analysis of different Rotating Equipment, tanks and other process equipment packages
· Drawing Review / Approval
· Developing and updating P &I Diagram and Process Flow Sheets based on mass and energy balance.
· Preparing Technical proposals and Sales offers and Man-hours Estimates
· Planning and scheduling the activities of the project
· Progress Monitoring and Quality control, inter-discipline co-ordinations

Major Projects handled

Working as Process/Mechanical Engineer – for different Saudi Aramco, SABIC and SCECO Projects in the field of Oil & Gas and Petrochemicals. Major Projects Handled include:
· Deatil engineering of all process equipments and packages including Tanks, Firefighting systems, foam generation system, chemical injection system, loading modules for Duba Bulk Plant and Marine Terminal for Saudi Aramco.
· Detail engineering of RO Plant and Acid Flare Line for UGP, Saudi Aramco
· Detail Engineering of SADAF Cogen plant OSBL Facilities
· Detail Engineering of KEMYA Chilled Water system Upgrade
· Feasibility study and recommendation, basic engineering and detail engineering for FCCU Compressed Air System for Jeddah Refinery-Saudi Aramco
· Detail engineering of all process equipments and packages including Tanks, Firefighting systems, foam generation system, chemical injection systems, loading modules for ABHA Bulk Plant for Saudi Aramco.
· Basic engineering of all process equipments and packages including Tanks, Firefighting systems, foam generation system, chemical injection system, loading modules for Duba Bulk Plant and Marine Terminal for Saudi Aramco.
· Worked for various modernization Projects of Riyadh refinery, Riyadh. This includes new cooling water system project and yield improvement project. Yield Improvement Project - a major expansion / modernization project for Riyadh refinery. The work includes tank farm extension, new pump stations, additional LPG recovery, HFO system upgrade to reduce black oil production, revamping of power plants to utilize sales gas as fuel to reduce operation cost etc.
· SADAF-Truck Loading Facility
· SCECO – Basic Engineering of Qaseem Fuel Oil Pipeline and Washing Plant

Jan’95 to July’98: UHDE INDIA LTD
(Subsidiary of KRUPP UHDE GmbH, Germany)

Position Held: ROTATING EQUIPMENT ENGINEER

Nature of Work (Basic and Detailed Engineering activities)

· Preparation of Technical Specifications, datasheets of different Rotating Equipment and process equipment packages in accordance to different industry codes and standards
· Bid Analysis and technical recommendation
· Drawing Scrutinizing/approval like P&ID, Layout Drawing, G.A. Drawings, C.S. Drawings etc.
· Inspection & testing of different Rotating Equipment in accordance to different industry codes and standards like API, BS, PTC, and DIN etc.
· Commissioning and trouble shooting of different Rotating Equipment’s and process equipments/packages.
· Refurbishment of Rotating Equipment’s

Major Projects handled

· Detailed engineering of Rotating Equipments for 200,000 TPA Ethyl Benzene / Styrene Monomer project setup by PT Styrindo Mono Indonesia with Mitsubishi Heavy Industries using ABB Lummus technology.
· Detailed engineering of Rotating Equipments for 650MW DCPP project setup by GTEC/SIEMENS in Gujarat, India
· Detailed engineering of Rotating Equipments for HDPE project setup by IPCL, Gujarat, India
· Detailed engineering of Rotating Equipments for Mangalore Refinery, Mangalore, India
· Other projects Handled as Lead Rotating Equipment Engineer include
· DHDS project for IOCL
· LAB Project for NIRMA
· PFY/PTA Project for SPIC
· Caustic Chlorine Projects for PACL, GACL, SCIL, IRIL
· Ammonia Storage and Handling Facilities for RCF, GFCL, CFL

1993 – 1994: WASP PUMPS LTD.
(A Myers Pump, USA licencee)

Position Held: APPLICATION AND SALES ENGINEER

Nature of Work (Design, Inspection an Marketing Activities)

· Worked as Marketing and Application Engineer
· Inspection, Testing and commissioning of pumps and pumping systems
· Preparation and checking of Design Drawings
· Involved in development of high speed pumps

Education

Course Year University/ Board Grade Major
Bachelor of Engineering – (B.E.) 1993 University Of Poona First Class with Distinction Mechanical Engineering

· Have attended Many short term courses, training programs and seminars on Rotating Equipments

Computer Literacy

· Well versed with the different software’s viz., AutoCAD, Microstation, Primavera, Windows NT/2000 and various Microsoft office Software like Access, Excel, Word, Power Point, Projects, Visio etc.
· Tank Design software Tank 2.10 from COADE
· Hysis Process Simulation
· Flarenet
· Familiar with working in LAN both Novell as well as Windows NT & WAN, Internet & Intranet, Environment.

Personal Details

Name: Madan Lal Gupta

Date of Birth: 07 May 1973

Marital Status: Married

Nationality: Indian. Passport No.: A1890848

Address for In India In Saudi Arabia
Correspondence: M.B.Gupta M.B.Gupta
B1/607, Himgiri Apt. Dar Al Riyadh Consultants
Lokgram, Kalyan(E) P.O.Box 20753
Thane 421306, INDIA Al Khobar 31952, Saudi Arabia
Phone: 0091-251-351113 00966 3 8919594 ext 318 (Office)
00966 3 8987634 (RESI)
E-mails: guptamb@hotmail.com mbgupta@daresd.com