Posted by on September 30, 19101 at 17:43:00:

CURRICULUM VITAE

NAME : SANDEEP J. SHARMA
ADDRESS : 1-SURBHI,
Nr. NAVRACHNA SCHOOL,
SAMA, BARODA. 390 008
INDIA.
EMAIL ID : S_J_SHARMA@HOTMAIL.COM
TELEPHONE : ++ 91 265 791 705
++ 91 265 784 427
BRIEF DESCRIPTION :
· Around 9 years of experience in the field of piping design primarily in PIPING LAYOUT OF CRITICAL AREAS OF HYDRO-CARBON PROCESSING PLANTS AND POWER PLANTS.

· Extensively worked on 3D piping design packages of PDS-3D. The package is based on MICRO-STATION platform.

· Undergone training for Auto - CAD and worked with the same for creation of P&IDs.

· Activities preformed are Preparation / Checking of:
· Plot plan.
· Equipment layout.
· Area Key Plans.
· Grid Key Plans.
· Piping layout plans.
· Bill of Material and Material Requisition.
· Isometric.
· Stress Analysis.
· Support diagrams and documents.
· Checking Vendor Drawings.
· Co-coordinating with other departments.

· Certified Internal auditor for ISO - 9000. Performed many internal audits for various departments of the company.

· Ambition in life - Take up a challenging career and gain professional excellence.

QUALIFICATIONS. :
· Internal auditor for ISO - 9000.
· Bachelor of Engineering (Mechanical) in 1992, Ist class with distinction.
· Undergone Auto - CAD training.
· Received training for the following packages of PDS-3D:
· Piping modeler.
· Equipment modeler.
· Isogen.
· Interference manager.
· Drawing manager.

PROFESSIONAL EXPERIENCE (In reverse Chronological Order) :
PRESENT EMPLOYER :
Working for: L & T - CHIYODA LTD.( A SUBSIDARY OF
CHIYODA, JAPAN)
Duration : SINCE AUGUST 2001.
Present position : PIPING DESIGN ENGINEER (A6).

Previous Employer(s) : Tecnimont ICB Ltd, India.

PROJECTS HANDLED :
Project name : RHDS, IOCL, INDIA.
Project description :
Estimation for a Residual Hydrocarbon & De-Sulphurising plant for IOCL, Baroda.
Responsibility :
I shared the Responsibility of preparing MTO, study piping and calculating support loads.

Project name : ISAGRO, INDIA.
Project description :
Site - visit and Preparation of P&Ids for an Agro - chemical industry, for the purpose of evaluation.
Responsibility :
As co-ordinator, I was responsible preparation of all the As - Built P&Ids related to the plant. The P&Ids were made using Auto - CAD.

Project name : PP-POLIBRAZIL, BRAZIL.
Project description :
A grass root Poly - propylene project in Brazil.
Units included in the plant are polymerization, TEAL, extrusion, silos and cooling towers.
Responsibility :
As area co-ordinator, I was responsible for the dryer area, reactor area and the compressor unit. I was involved in the preliminary material take-off activity, preparation of piping study drawings and checking of equipment layout for these areas.

Project name : PP - BANDAR IMAM, IRAN
Project description :
An Iran government sponsored Polypropylene project.
Responsibility :
Involved as support co-ordinator, to help support various line in polymerization unit and to co-ordinate with stress department. The area included in the scope was the dryer area of polymerization unit.

Project name : PIC - KUWAIT, KUWAIT.
Project description :
An Urea revamp project in Kuwait.
Scope of project included site surveys to study the existing piping and possibility of tie-in points and new piping in these areas and preparation of drawing for some new areas.
Responsibility :
Modeling of piping, equipments and cable trays(in PDS-3D ENVIRONMENT), extraction of isometrics, preparation of piping assembly drawings and supporting the lines for various areas.

Project name : Pradeep refinery, IOCL, INDIA.
Project description :
An IOCL refinery project in India.
This was a proposal project where in the scope was to submit the proposal / tender documents.
Responsibility :
Checking / Preparation of preliminary material take off and preparation of line-list.

Project name : PP-FELLUY, BELGIUM.
Project description :
A grass root Poly - propylene project in Belgium.
Units included in the plant are polymerization, TEAL and cooling towers.
Responsibility :
As area engineer for reactor area the scope assigned was to develop area key plans, equipment layout drawing, preliminary material take off, model the equipments and piping (in PDS-3D ENVIRONMENT), extraction of isometric, preparing secondary steel structure drawings, piping assembly layout drawings, checking the vendor drawings and support marking .

Project name : SEMB CORP. COGEN, PULAU SAKRA, SINGAPORE.
Project description :
A power plant project in Singapore for generation of 800MW electricity through combined cycle.
GE-Alstom(France) had down loaded this project for piping. Our scope of work was piping study, 3d-modeling of piping and support marking for the lines modeled.
Responsibility :
Area engineer for steam turbine hall and condenser area. The scope of responsibilities were 3d modeling of pipes (in PDS-3D ENVIRONMENT), preparation of drawings for secondary steel structures, support of lines, iso-extraction and preparation of piping assembly plans for the critical area of steam turbine hall and condenser.

Project name : LLDPE, HALDIA, INDIA.
Project description :
A Linear Low Density Poly-Ethelene plant in Haldia, India.
Units included in the plant are polymerization, extrusion, silos, TEAL and cooling towers.
Responsibility :
As support engineer the scope assigned was the support marking for all the areas.

Project name : PP-Ipiranga, Brazil.
Project description :
A grass root Poly - propylene project for Petroqumica in Brazil.
Units included in the plant are polymerization, extrusion, silos, TEAL and cooling towers.
Responsibility :
As area engineer for reactor area, the scope assigned was to develop area key plans, equipment layout drawing, material take off, piping assembly drawings (in MICRO-STATION), preparation and checking of isometric, preparing secondary steel structure drawings, checking the vendor drawings and support marking.

Project name : PP-Schkopau, Brazil.
Project description :
A Poly - propylene project for Dow chemicals in Germany.
Units included in the plant were polymerization, extrusion, silos, TEAL and cooling towers.
Responsibility :
As area engineer for the TEAL area and inter connecting pipe racks, the scope assigned was to develop area key plans, equipment layout drawing, material take off, prepare study piping, piping modeling (in OMNI), extraction of isometric, preparing secondary steel structure drawings, preparation and checking of piping assembly layout drawings, checking the vendor drawings and support marking.
Checking of piping assembly drawing and isometrics of reactor area.

Project name : PP-Baroda, India.
Project description :
A grass root Poly - propylene project for I.P.C.L., Baroda, India.
Units included in the plant were polymerization, extrusion, silos, TEAL, flare stack, butene storage sphere and cooling towers. The scope of work also included tie-in from existing units and revamp in existing units.
Responsibility :
As area engineer the scope assigned was to develop area key plans, equipment layout drawing, material take off, preparation and checking of piping assembly layout drawings and isometric, preparing secondary steel structure drawings, checking the vendor drawings and support marking.
Preparing material requisitions, floating enquiries and bid evaluation were also a part of responsibilities.

Project name : HPCL-Bombay, India.
Project description :
A lubricating oil facility for HPCL at Bombay, India.
Responsibility :
The scope assigned was to develop material take off, checking of piping assembly layout drawings and isometric, preparing secondary steel structure drawings, checking the vendor drawings.

Project name : ONGC-Ankleshwar, India.
Project description :
A natural gas compression station for ONGC at Ankleshwar, India.
Units included in the plant were compressor house, cooling tower, storage tank for water and nitrogen and air unit.
Responsibility :
The scope assigned was to develop plot plans, area key plans, equipment layout drawing, material take off, preparation and checking of piping assembly layout drawings and isometric, preparing secondary steel structure drawings, checking the vendor drawings and support marking.

COMPUTER ACQUAINTANCE :

Acquainted with the following software Micro Station, Omni package (for detailed Engineering), Auto-CAD, D-Base, Fox-Pro, Lotus, Quattro-Pro, WordStar, Excel and WinWord.

* Comfortable with INTERGRAPH'S PDS-3D modules:

- PDS EQUIPMENT.
- PDS PIPING.
- PDS ISOMETRIC EXTRACTION (ISOGEN).
- INTERFERENCE MANAGER.
- DRAWING MANAGER.

COMPUTER PROGRAMS DEVELOPED:

* Prepared fox-pro programs for generating Bill of Materials (Line-wise, consolidated and class-wise).
The program also generates Painting and Insulation Schedule automatically.
* Created menus for preparing layout drawings in Micro Station.