Posted by on March 04, 19101 at 03:46:32:

Resume
First name: Nassir
Surname: Abedi
Date of birth 16-8-1964
Place of birth Ahwaz,Iran

Education:
1983: Iranian High school diploma from Kharazmi high school
Tehran,Iran
1984-1985: German language course and pre college studies at Koeln
and Aachen,Germany
1985-1992:Master degree in electrical engineering from THDarmstadt
Technial University of Darmstadt,Germany
Major Area: Control technology
Thesis tittle: Digital Voltage Control with a VME Bus Single Card
Computer (68000) (Developing of a data acquisition card for VME
Bus )
Diploma thesis: Examination of Metal Deposition in an Electrolyte
System (Developing a metalizing method using a pulsing signal
Between a very sharp tip (radius<100nm) and a GaAs chip
in a gold-bath)

Professional Experience:
1993-1996: Employed as a researcher at IROST (Iranian Research
Organization for Science and Technology), Teharn, Iran
1996-until now: Employed as a lecturer and researcher at the KNTU
(Khadjeh Nassir-Al-Deen Toosi University of Technology), Tehran ,
IranTeaching activities:
1- Interface Circuits KNTU
2- Instrumentation KNTU
3- Linear Control System's Lab KNTU
4- Electrical Measurement Lab THDarmstadt
5- Telecommunication Lab THDarmstadt
5- TA for basic electrical-technology THDarmstadt

Industrial practical experience during study:
1- Basic practical experience A Van Kaik company in
Neuisenburg/Germany and Carl Schenck AG in Darmstadt,Germany

2- Electronic and computer practical experience at K+K company in
Darmstadt/Germany and Prime company in Dreieich,Germany

Industry research activities:
1- Automobile Distributorless Electronic Ignition Module,
KNTU
2- Evenness Tester using Capacitive Sensors for the
Textile industry
Farayab ltd.,Tehran,Iran
3- Spark Tester: Online Isolation Testing Equipment (20KV-dc)
for the Wire and Cable Production Line
Farayab ltd.,Tehran,Iran
4- Weather Parameter Measuring Instrument using Capacitive Sensors
for Weather Balloon IROST,Tehran,Iran

5- Design and Construction of an Automatic Dosing Equipment
for the Sugar Industry Takvinpat,Tehran,Iran

6- Automatic Wiring Test Equipment Takvinpat,Tehran,Iran

7- Cooperation at the Construction of a Hydraulic Shaker Table
I.B.Akbay, Darmstadt, Germany
8- RA at the Institute of High Voltage and Electrical Measurement in
Several Projects (approximately 3 years)
THDarmstad, Germany
9- RA at the Institute of Mechanical Engineering of THD: Cooperation
At the Construction of a Dialysis Pump (1 years)
THDarmstad, Germany
10- RA at the Institute of Control Technology of THD: Construction
of Interface Circuits for an Industrial Welding Robot (half
Year)
THDarmstad, Germany
11- RA at the Institute for Electric Energy Conversion of THD:
Cooperation at the AEG-Project: Interface Circuits for
Traction Motor drives (3 years)
THDarmstad, Germany
12- Vacation-work at the Magnum Company in Darmstadt: Alteration of a
Bootstrap Program for a Mini-Computer in PDP11-Language
Magnum LTD, Germany
13- Design of an A/D and D/A card for IBM-PC
KNTU
14- Design of an isolated digital I/O card for IBM-PC
KNTU
15- Designing of dc drives H-Bridge KNTU
16- Designing of ac induction motor drives for fractional horsepower motors
KNTU
17- Designing of Brushless DC-motor and motor driver
KNTU
18- Designing of stepper motor Driver for an automatic welding machine
KNTU
19-Designing of a TMS329C25 card for control applications
KNTU

Publication

1 - P. Niazi, N. Safari-Shad, and N. Abedi, "An Interactive
Environment for Design, Simulation and Real-Time Control of
Nonlinear Systems", American Control Conference
June 2000

2 - N. Safari-Shad, N. Abedi, and S. Dehsarvi, "Nonlinear optimally
Control design Experiments Using the Inverted Pendulum on at
Cart Paradigm", Euro. Contr. Conf. Karlsruhe, Germany, 31 August-
3 September, 1999,

3 - N. Safari-Shad, N. Abedi , and P. Niazi," Software Package for
Designing and Producing controllers for Nonlinear plants" (org.
Persian) Tehran May 1999

4 - N. Safari-Shad, N. Abedi, and S. Dehsarvi, "A least Action,
Nonlinear regulator design: The Inverted Pendulum on at Cart
Example", The 6th Iranian Conf. on Electr. Narrowly Tehran
May12-14 1998

Thesis under my supervisory:
1- Construction and Control of ball And Beam(Msc. Thes.)
2- Construction and Control of the Inverted Pendulum(Msc. Thes.)
3- Software for Design and Producing of Controller Software for
Nonlinear plants(Msc.Thes.)
4- Industry Field Bus on the Basis of CAN and Development of an OOP
Soft Ware Environment to use in DCS applications (Msc. Thes.)
5- 3-Phase UPS with Sinusoidal Wave form for 400Hz 115V
Applications (Bsc. Thes.)
6- Distance Measurement using Ultrasonic Methods (Bsc. Thes.)
7- Automobile Distributorless Electronic Ignition (Bsc. Thes.)
8- A Digital Servo DC-Plant for Teaching Digital Control and
Interfacing Circuits (Bsc. Thes.)

Languages:
1- German well in speech and writing
2- English middle in speech and writing

Special knowledge:
1- Programming Language Turbo-Pascal, Borland C,
Macroassembler 8086, Assembler 8048, Assembler 8051,
Assembler 68000, Assembler 68HC11, PDP11, C51
2- Word6.0, Win98, IE, Netscape, Pegasus mail,excel... up to date in Utility Software
3- Work experiences with Protel, Orcad, Pspice, EW, pcad, and eagel
4- Some experiences with FPGA from Altera
5- Experiences with logic analyser, Storage Oscilloscope,
Spectrum analyzer

Courses:
1- TV and Radio-Technician course
2- PLC/Simatic S5

Other abilities:
1- Mechanical Design and Drawing
2- Construction of Pneumatic and Hydraulic Systems
3- Mechanical and Electrical Handicrafts
4- Arc welding and gas welding experiences with steel and stainless steel (TIG)