Posted by on June 16, 19103 at 15:36:58:

William Hernández Paredes
Senior Piping Designer
210 Shawinigan DR. SW. Calgary –Alberta T2Y 3B4
e-Mail: wh2014@telusplanet.net Phone:403-6814971
Home: 403-3014971
CAREER SUMMARY
Mr. Hernández has 13 years Piping Design experience including, This experience has been gained in the petro-chemical and refinery industries. Specific skills and experience include:
-Design and check piping and equipment layout.
-Prepare G.A.’s and isometrics.
-Field survey.
-Piping Field Engineer , Re-rate piping system , construction engineer.
-Prepare P&ID’s.
-Supervise construction of piping systems.
Specific Computer Skills include:
-PDS trained in 1995.
-3D Modeling, Piping and Equipment.
-Use PDS to perform original piping design work.
-Load Specs.
-Drawing Extraction and Annotation. (ORTHOGEN)
-Interference Detection and Report Writing.
-Isogen.
-Design Review and Smart plan view.
-CAD Coordinator in Microstation
-CAD Coordinator in Autocad
-MS Office (Word-Excel)

DETAIL WORK EXPERIENCE.
FLUOR DANIEL CANADA LTD ( Roevin Technical People Ltd. ) 2001-May 2003
-Senior PDS Piping Designer Syncrude UE-1 Project. U & O (Utilities and Off sites): Plant 17-2 Natural Gas, Plant 19 Flare System Seal and Stack, Plant 20/21 Tanks area and Pipe racks, Plant 31-2 Condensate recovery unit, Plant 32-2 Potable Plant, Responsible for designing and maintaining process pressure piping systems. Layout and piping design from conceptual studies, Site surveys and rerate existing piping system , Including knowledge of P & ID's, design Tie in’s package, demolition iso’s and as built, Using Pds piping, Equipment, Isogen Extraction, clash detection and resolution, G.A Orthographic, Smart Plant View.
D.I.T. HARRIS (TECHNIP) 1999-2001.(VENEZUELA)
-PDS Piping Coordinator & Design Lead /. ISLA REFINERY UPGRADING PROGRAM. Slop Processing unit, Pipe rack and Structure study, Interface battery limit, Vacuum building, Responsible for production piping general layouts, details and isometrics, check drawings, P & ID’S, M.T.O’s, pipe supports, Pds support, using: Pds piping and equipment modeling, Isogen Extraction, clash detection and resolution, G.A Orthographic.
-PDS Piping Coordinator & Design Lead /. Modeling of Sincor Downstream Utilities Package. : Bfw, Steam, condensate unit/Fuel Gas unit/ Instrument air unit, Responsible for production & checking of piping & mechanical design layouts, general arrangements, isometrics, fabrication drawings, P & I.Ds & schematics, produced with the aid of 3D computer models & intelligent parts. Pipe support. 3D computer clash checking; material take off & estimating. Site surveys, pds-support and pds designers’ area. Others Isogen extraction, clash detection and resolution, G.A Intelligent Annotation (Orthogen)
TECNOCONSULT. S.A. 1998-1999.(
-PDS Piping Design Lead /Equipment and Piping Modeling of Petrozuata Vehop Downstream. : Amine Recovery unit and Sour Water Stripper Area. Responsible for production & checking of piping & mechanical design layouts, general arrangements, isometrics, fabrication drawings, P & I.Ds & schematics, produced with the aid of 3D computer models & intelligent parts. Pipe support. 3D computer clash checking; material take off & estimating. Site surveys, pds-support and designers area. Isogen extraction, clash detection and resolution, G.A Intelligent Annotation (Orthogen).
JANTESA C.A 1997-1998
-PDS Piping Designer / Equipment and Piping Modeling of Pequiven S.A PVC II Areas worked: Polymerize Area and Reactors. Responsible for production & checking of piping & mechanical design layouts, general arrangements, isometrics, fabrication drawings, P & I.Ds & schematics, produced with the aid of 3D computer models & intelligent parts. Pipe support Isogen extraction; clash detection and resolution, G.A Intelligent Annotation.

TECNOCONSULT. S.A.(TECNOFLOUR) 1992-1997
-PDS Piping Designer /Eqpt. Modeling of Lagoven S.A. HDS Expansion/ IAC II: Amine Regeneration Fuel Gas, Acid Gas compressor Fresh/Rich Amine Handling, MEA Generation Condensate, Mea Sump, Area. Responsible for Production & checking of piping & mechanical design layouts, general arrangements, isometrics, fabrication drawings, P & I.Ds & schematics, produced with the aid of 3D computer models & intelligent parts. Pipe support sogen extraction, clash detection and resolution, G.A Intelligent Annotation , Construction engeneer.
-PDS Piping Designer /Eqpt. Modeling of Tecnoconsult. S.A Pilot Project areas worked: Gas generation Plant, Load Specs Area. Production & checking of piping & mechanical design layouts, general arrangements, isometrics, fabrication drawings, P & I.Ds & schematics, Pipe support, G.A Annotation.
-Senior Piping Designer of Cordovan .S.A El Palate Refinery areas worked: Residual Water Treatment Plant. Service support for the plant design of the lines, AutoCAD Extracted plan drawings and Isometrics, Field Survey.
-Intermediate Piping Designer of Lagoven .S.A Amuay Refinery areas worked: Cfay Project Steam Generation Plant. Areas worked. Utility Air Compressor area. Omni Series and Microstation Extracted plan drawings and Isometrics
-Intermediate Piping Designer of Maraven .S.A Islas Refinery (Curacao) areas worked: Edup I CAD Coordinator, Designed and laid out P & ID’s using Autocad 12.
-Piping Designer at Pequiven.S.A Pto. La Cruz Refinery Supermetanol project Areas worked: Utility Areas, Water, Air, Autocad12 (AUTOPLAN) Extracted plan drawings and Isometrics, CAD Coordinator.
ASINCRO. S.A.
1990-1992
-Piping Designer of Maraven.S.A Cardon Refinery. Renovation of Industrial Services: Utility Areas, Steam Generation Plant. AutoCAD ver 10, Autoplan (REBIS) Extracted plan drawings and Isometrics, CAD Coordinator.

EDUCATION
-HIGH SCHOOL (FINISH IN VENEZUELA)
-UNIVERSITY (TECNOLOGY DEGREE) INDUSTRIAL DESING 2 YEARS
3DS NET. INC .1999. (DIT-HARRIS. -Orthogen training.
Fluor Daniel .1997. (Tecnoconsult .S.A) -Piping Design.
Intergraph (Huntsville-Alabama-Usa) 1995.
-Writing Reports Using PDS in Clix.
-Interference Detection PDS in Clix.
-Isometrics Extraction PDS in Clix.
-PDS 3-D Theory.
Fluor Daniel .1995. (Greenville Office SC., 400 hours) -PDS 3-D Piping and Equipment Modeling.
Tecnoconsult Ingenieros S.A .1994.
-Omni Pipe / Omni Iso. (35 hours) -Microstation 3-D and 2-D.
Ireconsultores C.A.1991.
- Piping Design in Process Plant Phase I / II. (35 hours)
Enterbyte C.A.1990.
- Intermediate Autocad, Version 10. (30 hours)
Solditeca C.A.1990.
-Industrial Piping Design (35 hours)
Exco Tecnology (Toronto-Canada) .1989.
-Design and Production of Extrusion Molds in
Numeric control (CAD-CAM) (4 Month)
Alcanven C.A.1989
-Computer introduction.
Lecher Ebbinghaus Institute 1989.
-English & Communication.
HIGUERA MECHINICAL INSTITUTE OF DRAWING AND ART 1981
-Mechanical Technician Drawing.