Posted by on April 23, 19103 at 12:49:44:

CV/Resume Detail
Name: Mr. Prathan Sri-U-Ram
Position: Instrument and Control Senior Engineer.
Address: 48/182 Moo 1 Tambol Klong 1, Amphur Klonglueng Patumthani 12120
Present Address: 24 Moo 6 Ban Sountakad Tombol Pla Banchang Rayong Thailand 21130
E-mail address: sprathan@hotmail.com
Telephone No: Home Rayong: 663801171 BKK 6625161638 Mobile Phone 6619224921
Date of Birth: February 03, 1954
Nationality: Thai
Religion: Buddhism
Education: Bachelor degree (Industrial Technology Electricity)
Rajabhat Institute Rajanagarindra Chachoengsao
Position Require: Electrical/Instrument Control Senior Engineer
Summary of work experience
Over twenty years of direct experience in electrical, controls and instrumentation design, installation, start-up, commissioning, operation and maintenance in a variety of industries. Specific engineering expertise in instrumentation, control systems and power equipment and proven experience in providing engineering services to a variety of Customers both domestically and internationally. Demonstrated knowledge and experience in PLC control for installation software and hardware test. DCS installation and the use of other software tools to plan, execute, monitor, analyze and report status.
Experienced in preparation of evaluations, technical reports, project management and staff supervision. Lead Commissioning, Installation, Calibration, Maintenance, and Loop–test, and work. For Petrochemical, Cement, Power plant, Oil/Gas separation plant, Refinery plant Paper plant But not limited to QA & QC Supervision, Inspection, Safety audit.
DCS control systems work with Bailey Foxboro, Modicon, Provox, Yamatake Honeywell,(TDC 3000) Rosemount, Yokogawa, Fisher, and Allen Bradley Mitsubishi digital controller. TALOR mod 300, ABB KENT, Including motor speed controller (VFD) Rotork MOV MCC with DCS interface electrical control, power distribution, SULZER,Aslas Capco Compressor, ABB analyzers system, Responsible for vendor skid instrumentation audit and direct engineering support. Interlock systems test, Fire alarm system commissioning, Gas protection system, PA and security systems CCTV, water treatment commissioning. Tank farm system Tank Gauge level Enraf system. Experience majority in lead commissioning engineer over 15 years.

Work Experience
Jan 2002-Dec2002: Black & Vetch Power Thailand Co., Ltd
Project: Bang Bo Power Plant 350 MW (CCPP) Co., Ltd.)
Employer: Black & Vetch Power Thailand Co., Ltd
Location: Bang-Bo Samutprakarn Thailand
Position: Instrument Senior Engineer. (I&C)
Description of work:
Inspection electrical, controls and instrumentation engineering reviewed for projects at Bang-boo Power Generation's Gas turbine and steam turbine system. Electric power stations interface check specifically technical support for control system upgrades Engineering deliverables included: conceptual and detail design, condition reports; recommendation reports, reviews design drawings; instrument index, I/O lists and other database applications, technical reviews and evaluations; preparation of technical Inspection of instrument on Alstom Gas Turbine (GT26) and Steam Turbine single shaft. Specification review and monitoring report to Construction Manager.
Bang Bo Power Plant is used Gas fire on performance 350 MW with Steam turbine single shaft Eastern Power and Electric Co., Ltd. (Owner) Black& Vetch Power Thailand (Consultant) Alstom Power (Contractor)
June 2001-Dec 2001: Bayer (Thailand) BPA Project Maptaphut
Project: BPA Project (Petrochemical plant)
Employer: Bayer (Thailand) BPA Project Maptaphut
Location: Maptaphut, Rayong Thailand.
Position: Instrument Senior Engineer
Description of work:
Supervision for Erection work, Responsible for Steam heat-tracing installation and loop drawing reviews and field change design, Issue punch list to Contractor Hydro test and commissioning work
May 2000-May 2001: LGMEI (Thailand) Co., Ltd.
Project: Procter & Gamble Manufacturing (Thailand)
JADE Project (Modify PLC and Installation Machine skid)
Employer: LGMEI (Thailand) Co., Ltd.
Location: Wellgrow Industrial Estate Km.36, Chachoengsao
Position: Electrical - Instrument - Control Engineer.
Description of work:
Allen Bradley PLC Installation and Modify to exiting loop. Functional testing. For control panel, Design new control panel to match with new machine, Instrument installation and testing Change design for Temperature controller with heater installation. Installation motor speed control ( VFD ) Electrical installation and Commissioning. Work by 24 hours call for emergency work
Aug.1999-April 2000 LGMEI (Thailand) Ltd.
Project: Chemdal SEA Project (Chemical Plant)
Employer: LGMEI (Thailand) Ltd.
Location: Eastern Seaboard Industrial Estate, Rayong
Position: Electrical - Instrument - Control Engineer.
Description of work:
Responsibilities included project definition, system/hardware specifications and procurement, database application analysis and programming test, DCS and screen graphics configuration check, including batch control and PLC programming test, simulation signal testing prior to on-site installation. Installation work management for Electrical and Instrumentation Engineering change design for PLC and DCS Lead for loop-test and commissioning Hook-up design change To purchase material and to coordinate with LOCKWOOD GREENE USA work continued Including Commissioning and Start up plant.
Mar 1999-Aug 1999: ESSO Refinery Thailand
Project: TRAP Project (Aromatic Plant)
Employer: Foster Wheeler International Corporation
Location: Lhamchabung Chonburi
Position: Instrument Engineer.
Description of work:
Inspection instrument installation and verifies for punch list and coordinate with client and contractor to cleared all punch list at open item to closed item and support to commissioning team.
Nov.1997-Feb. 1999: Bangkok Thinetirc Thailand Co., Ltd
Project: BST/BSTE (Petrochemical plant)
Employer: Foster Wheeler International Corporation Thailand.
Location: Maptaphut Rayong
Position: Instrument Engineer.
Description of work:
Responsible for instrumentation work, DCS and PLC system installation and reviews engineering design for Contractor Specification check, Calibration, Instrumentation progress work reports, monitoring reporting. Supervision DCS and PLC commissioning and start up plant.

Feb.1997-Oct. 1997: National Fertilizer Complex (NFC)
Project: National Fertilizer Complex Plant.
Employer: Foster Wheeler International Corporation
Location: Maptaphut, Rayong Thailand
Position: Instrument Engineer
Description of work:
Responsible for vendor skid instrumentation audit and direct engineering support for installation Instrumentation work, Inspection for DCS and PLC Installation change design for field instrument commissioning
Dec.1995-Jan.1997: Electricity Generating Authority of Thailand (EGAT).
Project: Wangnoi Power Plant Project. (1800 MW)
Employer: Mitsubishi Corporation Thailand Ltd.
Location: Wangnoi Ayudthaya
Position: DCS & Instrument Engineer.
Description of work:
Responsibilities included project definition, system/hardware specifications and database application analysis and programming, logic and control software development, DCS system installation configuration check including batch control and PLC simulation test internal software Testing signal from Bailey Control DCS System to Mitsubishi Gas turbine controller panel. Connection Optic cables and testing, Loop cables connection and testing. Loop test signal from field to DCS and PLC and SEM panel Instrument trouble shooting solution. Water treatment DCS and PLC installation instrument calibration and commissioning Support Start up for Steam Turbine and Gas Turbine start-up team Responsibilities included Water treatment Instrument adjusting commissioning. During Performance Report.
May.1995-Dec.1995:
Project: Monsanto Premier Kasei (Petrochemical plant)
Employer: Morrison Knudsen (Thailand) Co, Ltd.
Location: Maptaphut, Rayong
Position: Electrical & Instrument Senior Engineer.
Description of work:
Support Engineering for reviews design and change design I/O list, Specification definition, system/hardware and revises loop drawing and hook up drawing Quality control for installation, calibration, loop test, commissioning, Lead Supervisor for QA & QC & database setup for work monitoring Installation DCS and PLC system (fisher Provox, Modicon PLC)
Feb.1995-Apr.1995: Thai Terminal Tank Co., Ltd.
Project: Tank farm
Employer: Rotary Thailand Ltd
Location: Maptaphut, Rayong
Position: Electrical & Instrument Site Manager.
Description of work:
Provided electrical, controls and instrumentation engineering under contract with Mitsubishi Sulzer Responsible for specifications and procurement of instrumentation and control system components for New Ethylene and Propylene Tank, Loading arm Instrument installation PA and CCTV installation and commissioning including Level Tank Gauge (Enraf) control system, Installation DCS , PLC, Mimic Panel. Responsible for Loop test and Interlock system, testing control system, and analyzer System, progress work, status work reporting. Supervision for installation work and commissioning
Sep.1994-Jan.1995: Thai Oil Refinery Thailand.
Project: Thai Oil TOC3 Revamp (Refinery Plant)
Employer: ABB Service Thailand.
Location: Lhamchabung Chonburi
Position: Commissioning & Maintenance Supervisor
Description of work:
Schedule plan for remove instrument from field and send to work shop for calibration and instrument spare part check for repair instrument control valve and new instrument install Loop test after installation finished Work for DCS system Yamatake Honeywell TDC 3000
May.1993-Sep.1994:
Project: Olefin Plant (TOC)
Employer: ABB Service Thailand
Location: Maptaphut, Rayong Thailand.
Position: Control - Instrument Section manager.
Description of work:
Responsible review Drawing and specification technical support for installation work Planning progress Analyzer, DCS, Fire protection, Gas detector, PA, CCTV, Network Cable installation. Monitoring work reporting. Installation, Loop test and interlock test work continued to Commissioning Start up plant Work for DCS, Yamatake Honeywell TDC 3000.
Nov.1992-May.1993: ABB Service Co., Ltd.
Project: Asia Cement Co., Ltd. Saraburi (Cement Plant)
Employer: ABB Service Co., Ltd.
Location: Saraburi Thailand.
Position: Instrument Commissioning Engineer.
Description of work:
Responsible commissioning team for loop test solution and repairing loop to correct to DCS to support operation team start up plant.
Jul.1992-Nov.1992: ABB Service Co., Ltd.
Project: Siam Cement Co., Ltd. Saraburi (Cement Plant)
Employer: ABB Service Co., Ltd.
Location: Saraburi Thailand.
Position: Electrical and Instrument Engineer.
Description of work:
Electrical and instrument Calibration and Commissioning.
Nov.1991-Jul. 1992: ABB Service Co., Ltd
Project: EPS Plant TPI Rayong (Petrochemical plant)
Employer: UHDE Gmbh&TPI
Location: Rayong.
Position: Installation & Commissioning Engineer
Description of work:
Installation, Calibration, Loop-test, and Commissioning and start up plant, Work for DCS system Rosemount Version 3 Interlock and function Testing, analysis system, and supervisor
Mar.1991-Nov.1991: ABB Service Co., Ltd.
Project: Siam Cement Co., Ltd. (Cement Plant)
Employer: ABB Service Co., Ltd.
Location: Kang Koil Saraburi
Position: Electrical and Instrument Supervisor
Description of work:
Instrument, electrical, installation and commissioning Work for DCS system Yamatake Honeywell TDC 3000 Interlock system, testing control system, Analyzer system, supervisor
Nov.1990-Mar.1991: ABB Service Co., Ltd.
Project: Voest Alpine IND (Pulp and Paper Plant.)
Employer: Siam Craft
Location: Karnjanaburi
Position: Instrument /Electrical Supervisor
Description of work:
Installation instrument, electrical work Work for DCS system Yamatake Honeywell TDC 3000 Interlock system, testing control system, Analyzer system, supervisor
Aug.1990-Nov.1990: ABB Service Co., Ltd.
Project: Vinythai Maptaphut Rayong (Petrochemical Plant)
Employer: ABB Service Co., Ltd.
Location: Maptaphut Rayong
Position: Instrument Supervisor
Description of work:
Commissioning installation, supervisor Work for DCS system Yamatake Honeywell TDC 3000 Interlock system, testing control system, Analyzer system, supervisor
May.1990-Aug.1990: ABB Service Co., Ltd.
Project: Sak Chai Sidhi Maptaphut (Petrochemical Plant)
Employer: ABB Service Co., Ltd.
Location: Maptaphut, Rayong Thailand.
Position: Commissioning Supervisor
Description of work:
Electrical & Instrument Installation Commissioning Calibration and loop test And Installation DCS controls system Interlock system, Testing control system, analyzer system, Progress work, status work reporting. Supervision For installation work and commissioning
Oct.1989 May.1990: TPI&UHDE.Gmbh
Project: Thai Petrochemical Industry.
Employer: ABB Service Co., Ltd.
Location: Rayong.
Position: Instrument - Commissioning Supervisor
Description of work:
Work for Instrument Calibration and loop test DCS system TALOR MOD 300 Commissioning and Start-up plant
Apr.1989-Sep.1989: NKK.Corp., Ltd.,
Project: PTT Gas Separation plant
Employer: NKK.Corp., Ltd.,
Location: Maptaphut, Rayong Thailand
Position: Instrument Supervisor.
Description of work:
Electrical and instrument installation Calibration and loop test. And Installation DCS controls system Interlock system, Testing control system, and analyzer system. Progress work, work status reporting. Supervision For installation work and commissioning
Dec.1988-Mar.1989: Shane Instrument Tech Service Co., Ltd.
Project: Peroxy Thai Maptaphut Rayong (Petrochemical plant.)
Employer: Shane Instrument Tech Service Co., Ltd.
Location: Maptaphut Rayong.
Position: Electrical and Instrument Supervisor.
Description of work:
Installation Field Instrument and Calibration all instrument in calibration room. Interface signal check from MCC to DCS Fire alarm installation and commissioning Loop test and work continued to Commissioning starts up plant Work for DCS system. Fisher Provox.
Aug.1984-Nov.1988: Shane Instrument Tech Service Co., Ltd.
Project: Refinery Plant, Gas Separation plant, Petrochemical plant
Employer: Shane Instrument Tech Service Co., Ltd.
Location: Rayong.
Position: Installation & Commissioning Supervisor
Description of work:
Drawing Review and manage teamwork for Installation work. Installation cable tray, conduit, tubing cables wiring Calibration control valve and Instrument install MCC panel, DCS, Control panel, CCTV, Fire fighting. Install Loop cable for DCS Cables test Loop test and commissioning.
Jul. 1980 Jul. 1984: Saudi Elector Mechanical Const. Co., Ltd.
Project: Saudi Refinery Plant.
Employer: Saudi Elector Mechanical Const. Co., Ltd.
Position: Instrument Technician
Description of work: Installation Instrument on field and electronic part in control room wiring cable for instrument and Electrical, Cables test, Loop test, Calibration. Installation Tubing for control valve and instrument Install Gas detector.
Jan.1976-May.1980: Thai Melon Polyester Co., Ltd.
Project: Polyester Plant.
Employer: Thai Melon Polyester Co., Ltd.
Position: Electric/Instrument Technician
Description of work: Electrical drawing draft work under supervisor order that work is construction period and work continued to commissioning and start up plant then move to staff maintenance team Duration work motor repairing change bearing control valve repairing re calibration instrument when plant is shutdown period change lighting lamp and additional cable trey and conduit if have process order to modify maintenance Dryer machine repair and stand by work with operation team for emergency work.
Other Experience:
Fiber optic cable installation and testing - And completed for all HVAC System to install and commissioning. Monitoring report for overall work in project, Computer Program used (Microsoft office) Microsoft Excel/ Microsoft, Word, Microsoft Project, and Microsoft Power Point, and Microsoft Access.
Experience work under ISO 9002.